| Last Modified: 11-29-2007 | 1.6 T | |
| Service Category: Engine/Hybrid System | Section: Cruise Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000PLS031X |
| Title: CRUISE CONTROL: CRUISE CONTROL SYSTEM: PROBLEM SYMPTOMS TABLE (2008 Sequoia) | ||
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Cruise Control System
|
Symptom |
Suspected Area |
See page |
|---|---|---|
|
Vehicle speed cannot be set. (The CRUISE main indicator light comes on.) |
Cruise control switch circuit |
|
|
Combination meter |
|
|
|
Vehicle speed sensor circuit |
|
|
|
Stop light switch circuit |
|
|
|
Transmission range sensor circuit (for A750F) |
|
|
|
Transmission range sensor circuit (for A750E) |
|
|
|
Transmission range sensor circuit (for AB60F) |
|
|
|
Transmission range sensor circuit (for AB60E) |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed cannot be set.) |
Stop light switch circuit |
|
|
Vehicle speed sensor circuit |
|
|
|
Cruise control switch circuit |
|
|
|
Transmission range sensor circuit (for A750F) |
|
|
|
Transmission range sensor circuit (for A750E) |
|
|
|
Transmission range sensor circuit (for AB60F) |
|
|
|
Transmission range sensor circuit (for AB60E) |
|
|
|
Combination meter |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed can be set.) |
Cruise main indicator light circuit |
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
The cruise control is canceled while it is operating. |
Stop light switch circuit |
|
|
Transmission range sensor circuit (for A750F) |
|
|
|
Transmission range sensor circuit (for A750E) |
|
|
|
Transmission range sensor circuit (for AB60F) |
|
|
|
Transmission range sensor circuit (for AB60E) |
|
|
|
Cruise control switch circuit |
|
|
|
Vehicle speed sensor circuit |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light remains on.) |
Cruise control switch circuit |
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light goes off.) |
ECM |
|
|
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light remains on.) |
Vehicle speed sensor circuit |
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light goes off.) |
ECM |
|
|
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.) |
Stop light switch circuit |
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.) |
ECM |
|
|
Moving the shift lever does not cancel the cruise control. |
Transmission range sensor circuit (for A750F) |
|
|
Transmission range sensor circuit (for A750E) |
|
|
|
Transmission range sensor circuit (for AB60F) |
|
|
|
Transmission range sensor circuit (for AB60E) |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
Hunting (Speed is not constant.) |
Vehicle speed sensor circuit |
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|
The CRUISE main indicator light remains blinking. |
TC and CG terminal circuit |
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE). |
|
|
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE). |
|
|
|